Focus™ Vapor Steamer (1600)
Troubleshooting the 1600 Focus™ Vapor Steamer. ProblemPossible CauseSolution Does not produce heat. High limit control is tripped. Reset by pushing in ...
Thu, 7 Nov, 2019 at 2:47 PM
Problem: The Focus™ stops producing steam. Solution: Bypass the Manual Thermostat on the steam kettle. Required equipment: Phillips screwdriver or...
Fri, 1 May, 2020 at 2:04 PM
Problem: The Focus™ stops making steam after initial steam runs out. Solution: Bypass the Manual Sensor on the steam kettle and add insulation to protec...
Thu, 4 Jun, 2020 at 3:27 PM
The image below shows the wiring for the Focus Vapor Steamer model 1600.
Wed, 20 Oct, 2021 at 7:44 AM
When shipped the Thermostat will have a red rubber sealant covering the calibration screw. See image below. This Red rubber sealant must be removed...
Fri, 18 Feb, 2022 at 1:07 PM
Tools Needed: 5/8 wrench 7/8 wrench 11/16 wrench 9/16 wrench Vise Grip Adjustable wrench 3/16 Allen socket 3/4 wrench Philips bit Sanding disc ...
Tue, 11 Apr, 2023 at 9:54 AM
Step 1: Remove Water Control Board Disconnect the float switch leads from the board. Disconnect the Black, Blue, and White wires from the board. Remove...
Wed, 9 Aug, 2023 at 12:23 PM