Troubleshooting for Carpet Shark™ Counter Rotating Brush Machines.

ProblemPossible CauseSolution
Brush doesn't spin.Loose or broken belts.
Remove belt cover and tighten belts, or replace belts if worn out. Avoid over tightening belts, this will cause premature wear out.
Machine doesn’t turn on when handle is lowered.
Switch not engaging.
Adjust the switch to ensure it will engage. Follow the instructions HERE.
Handle not locking into place.
Spring came off of handle release lock.
Take off left side black panel and reattach spring.
Machine turned off.
Breaker needs to be reset.
Insert a paperclip into the hole on the right side black panel to reset breaker. Check belts.